高额定电压小电压电流检测台仪（耐电弧放电检测台仪）-（算出机抑制）

High voltage low current tester (arc resistance tester) - (computer control)

的产产品标题：耐电弧试验机

Product name: electric arc resistance tester

服务型号查询：NDH-A

Product model: NDH - A

提供规则：GB/T 1411-2002《固状绝缘电阻涂料耐高放低直流电焊弧充放的疲劳试验》（等一起IEC  61621-1997）及ASTM D495等标的标准制定营造的，并合适IEC 149、UL 746A等试验台最简单的方法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

注意使用使用范围及特点：

本检测机是，并按照技术应应用于主轴电机、电器开关开关和生活费电器开关开关等产业的水电工用氟朔胶、聚酯树酯胶和接地带漆等接地带建筑原料的耐脉冲放电效果鉴定，主应用于固状接地带建筑原料如：氟朔胶、聚酰亚胺膜、聚酯树酯、矿石、淘瓷、有机玻璃、接地带油、接地带漆、厚纸板等材质的耐脉冲放电效果检验；

本试验报告机由算机调节启动，不错提示现今研究环境及研究准确时间，研究完毕后并保存文档现今研究动态数据，并可打印纸.规则进行实验检测结果。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为前后整体的结构，上方为使用体系，上方为现场实验箱。

2 本货品适用*新智能化操控技术工艺，能够选定过程（IEC或ASTM）可半自动做耐压试验，并在电脑主机上出现校正环节和最终。

3 **功效健康，抗侵扰本事强，测验表面粗糙度不高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断时数据误差：不大于 ±10ms

2 调压器存储量：2kVA

3 电机额定功率试验检测电压降：12.5kV

4 做实验的时候线电压高精准度：±3%

5 工作电流把控误差：±10%  工作电流精确测量表面粗糙度：1.5%

6 探针对钢材拉伸试验负担：（0.5±0.05）N

7 电级原材料：钨棒

8 金属电极相应：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 在使用工作环境溫度：（23±2）℃

10 在使用生活环境温湿度：（50±5）%

11 电原：220V±5%  50Hz  10A

12 试验装置    的方式：   行业标准/美标/10 mA 不断/20 mA 联续/30 mA不间断/40 mA连续性

13 应力测试程序流程以下几点：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 產品型号查询：

NDH-A    耐弧光经过多次实验发现仪-微机调整

NDH-B    耐脉冲应力测试仪-触摸屏有效控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！